Alaabta
Tungsten Carbide Alloy Stone Goynta Mindi
Sharaxaada
-
Astaamaha walxaha tungsten carbide
- Adag sare:
- Qalafsanaanta carbide tungsten waa mid aad u sareysa, oo ka xigta kaliya dheeman, taas oo siinaya iska caabin heer sare ah. Inta lagu jiro isticmaalka waalka, waxay si wax ku ool ah u diidi kartaa nabaad-guurka iyo xirashada dhexdhexaadinta, kordhinta nolosha adeegga ee valve.
- Iska caabbinta daxalka:
- Tungsten carbide waxay leedahay sifooyin kiimikaad oo xasiloon si fududna loogama falceliyo warbaahinta daxalaysa sida aashitada, alkali, milixda, iwm. Waxa loo isticmaali karaa wakhti dheer meelaha daxalka adag ee aan waxyeello lahayn.
- Iska caabbinta heerkulka sare:
- Barta dhalaalka ee carbide tungsten waa mid aad u sareysa sida 2870 ℃ (sidoo kale loo yaqaan 3410 ℃), kaas oo leh iska caabin heerkul sare oo wanaagsan oo ilaalin kara waxqabadka xasilloon ee xaaladaha heerkulka sare.
- Xoog sare
- Carbide Tungsten wuxuu leeyahay awood sare wuxuuna u adkeysan karaa cadaadis weyn iyo xoog saameyn leh, hubinta hawlgalka xasilloon ee valves ee xaaladaha adag ee shaqada.
-
Astaamaha tungsten carbide stone cutter
- Adag sare:
- Tungsten carbide (WC) waxay leedahay qallafsanaan aad u sarreeya, taas oo u sahlaysa tungsten carbide stone cutters si ay u qabtaan dhagxaan adag oo kala duwan, hubinta habka goynta siman.
- Iska caabbinta xidhashada wanaagsan:
- Sababtoo ah adkaanta sare ee tungsten carbide, tungsten carbide jeexjeexyada dhagaxyada dhagaxa ah waxay ilaalin karaan waxqabadka goynta wanaagsan inta lagu jiro isticmaalka muddada dheer, si sahlan looma xidho, sidaas awgeedna waxay kordhiyaan nolosha adeegga qalabka.
- Degenaansho kiimikaad oo xooggan:
- Tungsten carbide waxay leedahay sifooyin kiimikaad oo deggan oo aan ka falcelinin inta badan walxaha kiimikaad, taas oo hubisa in waxqabadka tungsten carbide stone cutters aysan saameyn doonin falcelinta kiimikada marka la jarayo dhagaxa.
- Waxqabadka goynta wanaagsan:
- Qalabka dhagxaanta ee tungsten carbide waxay leeyihiin waxqabadka goynta aad u fiican, kaas oo si dhakhso ah oo sax ah u jari kara dhagaxa oo wanaajin kara waxtarka wax soo saarka.
-
Faa'iidooyinka tungsten carbide Stone Cutter
- Horumarinta waxtarka goynta:
- Adkeysiga sare iyo xirashada caabbinta ee tungsten carbide stone cutters awood u si ay u ilaaliyaan hawl-xawaaraha sare leh marka la jarayo dhagaxa, oo sidaas u wanaajinaya goynta hufnaan iyo gaabinta wareegyada processing.
- Iska yaree kharashyada habaynta:
- Sababtoo ah nolosha adeegga dheer ee tungsten carbide jarida dhagaxyada, inta jeer ee beddelka qalabku waa la dhimay, taas oo hoos u dhigaysa kharashka wax-qabadka. Dhanka kale, waxqabadkeeda goynta aadka u fiican ayaa sidoo kale ka caawisa in la yareeyo qashinka dhagaxa iyo sii wanaajinta faa'iidooyinka dhaqaale.
- Hubi tayada habaynta:
- Waxqabadka goynta xasilloon iyo iska caabbinta xirashada wanaagsan ee gooyayaasha dhagaxa carbide tungsten waxay awood u siinayaan inay ilaaliyaan saamaynta goynta-sare ee saxda ah marka la jarayo dhagaxa, hubinta tayada farsamaynta.
- Codsi ballaadhan:
- Qalabka dhagxaanta ee tungsten carbide ma aha oo kaliya ku habboon dhagaxyada adag ee kala duwan, laakiin sidoo kale in lagu farsameeyo dhagaxyada qaababka iyo cabbirrada kala duwan, oo leh karti sare.
Shaxda Waxqabadka Agabka
| Darajada Cobalt Binder | ||||||||||||
| Darajo | Halabuurka(% miisaanka) | Guryaha Jirka | Cabbirka hadhuudhka (μm) | U dhiganta to gudaha | ||||||||
| Cufnaanta g/cm³(±0.1) | AdagHRA (± 0.5) | TRS Mpa(min) | Porosity | |||||||||
| WC | Ni | Ti | TaC | A | B | C | ||||||
| KD115 | 93.5 | 6.0 | - | 0.5 | 14.90 | 93.00 | 2700 | A02 | B00 | C00 | 0.6-0.8 | YG6X |
| KD335 | 89.0 | 10.5 | - | 0.5 | 14.40 | 91.80 | 3800 | A02 | B00 | C00 | 0.6-0.8 | YG10X |
| KG6 | 94.0 | 6.0 | - | - | 14.90 | 90.50 | 2500 | A02 | B00 | C00 | 1.2-1.6 | YG6 |
| KG6 | 92.0 | 8.8 | - | - | 14.75 | 90.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG8 |
| KG6 | 91.0 | 9.0 | - | - | 14.60 | 89.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG9 |
| KG9C | 91.0 | 9.0 | - | - | 14.60 | 88.00 | 3200 | A02 | B00 | C00 | 1.6-2.4 | YG9C |
| KG10 | 90.0 | 10.0 | - | - | 14.50 | 88.50 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG10 |
| KG11 | 89.0 | 11.0 | - | - | 14.35 | 89.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG11 |
| KG11C | 89.0 | 11.0 | - | - | 14.40 | 87.50 | 3000 | A02 | B00 | C00 | 1.6-2.4 | YG11C |
| KG13 | 87.0 | 13.0 | - | - | 14.20 | 88.70 | 3500 | A02 | B00 | C00 | 1.2-1.6 | YG13 |
| KG13C | 87.0 | 13.0 | - | - | 14.20 | 87.00 | 3500 | A02 | B00 | C00 | 1.6-2.4 | YG13C |
| KG15 | 85.0 | 15.0 | - | - | 14.10 | 87.50 | 3500 | A02 | B00 | C00 | 1.2-1.6 | YG15 |
| KG15C | 85.0 | 15.0 | - | - | 14.00 | 86.50 | 3500 | A02 | B00 | C00 | 1.6-2.4 | YG15C |
| KD118 | 91.5 | 8.5 | - | - | 14.50 | 83.60 | 3800 | A02 | B00 | C00 | 0.4-0.6 | YG8X |
| KD338 | 88.0 | 12.0 | - | - | 14.10 | 92.80 | 4200 | A02 | B00 | C00 | 0.4-0.6 | YG12X |
| KD25 | 77.4 | 8.5 | 6.5 | 6.0 | 12.60 | 91.80 | 2200 | A02 | B00 | C00 | 1.0-1.6 | P25 |
| KD35 | 69.2 | 10.5 | 5.2 | 13.8 | 12.70 | 91.10 | 2500 | A02 | B00 | C00 | 1.0-1.6 | P35 |
| KD10 | 83.4 | 7.0 | 4.5 | 4.0 | 13.25 | 93.00 | 2000 | A02 | B00 | C00 | 0.8-1.2 | M10 |
| KD20 | 79.0 | 8.0 | 7.4 | 3.8 | 12.33 | 92.10 | 2200 | A02 | B00 | C00 | 0.8-1.2 | M20 |
| Nikel Binder Fasalada | |||||||||||
| Darajo | Halabuurka (% miisaanka) | Guryaha Jirka | U dhiganta to gudaha | ||||||||
| Cufnaanta g/cm3 (± 0.1) | Adag HRA (± 0.5) | TRS Mpa(min) | Porosity | Hadhuudh (μm) | |||||||
| WC | Ni | Ti | A | B | C | ||||||
| KDN6 | 93.8 | 6.0 | 0.2 | 14.6-15.0 | 89.5-90.5 | 1800 | A02 | B00 | C00 | 0.8-2.0 | YN6 |
| KDN7 | 92.8 | 7.0 | 0.2 | 14.4-14.8 | 89.0-90.0 | 1900kii | A02 | B00 | C00 | 0.8-1.6 | YN7 |
| KDN8 | 91.8 | 8.0 | 0.2 | 14.5-14.8 | 89.0-90.0 | 2200 | A02 | B00 | C00 | 0.8-2.0 | YN8 |
| KDN12 | 87.8 | 12.0 | 0.2 | 14.0-14.4 | 87.5-88.5 | 2600 | A02 | B00 | C00 | 0.8-2.0 | YN12 |
| KDN15 | 84.8 | 15.0 | 0.2 | 13.7-14.2 | 86.5-88.0 | 2800 | A02 | B00 | C00 | 0.6-1.5 | YN15 |
Halkan ku qor fariintaada oo noo soo dir
